BIS Certification for Oil Pressure Stoves – IS 1342

CCl- Compliance Calendar LLP

Volume

1

Rate

1

Pitch

1

Oil pressure stoves are commonly used in households and commercial kitchens across India due to their affordability and efficiency. These stoves operate by burning pressurized kerosene oil and are widely relied upon in areas where LPG or electricity is not accessible. However, since these stoves involve combustible fuel under pressure, ensuring their safety is critical. To regulate the manufacturing and sale of oil pressure stoves and to assure quality, the Bureau of Indian Standards (BIS) has made it mandatory for such products to obtain BIS certification under Indian Standard IS 1342. This article explains the entire process of BIS certification for oil pressure stoves in detail. It highlights the applicable standards, certification procedures, benefits, documentation requirements, and timelines.

What is BIS?

The Bureau of Indian Standards (BIS) is the national standards body of India, functioning under the Ministry of Consumer Affairs, Food and Public Distribution. BIS was originally established under the BIS Act of 1986, replacing the earlier Indian Standards Institution (ISI). Later, the BIS Act of 2016 came into force on October 12, 2017, expanding its role to ensure consistency in standardization, product testing, and certification across the country.

The primary objective of BIS is to develop and implement Indian standards that ensure product safety, quality, and consumer protection. It carries out product certification through its Conformity Assessment Scheme, including both mandatory and voluntary certification programs. BIS certification offers a third-party assurance that the product complies with prescribed standards.

What is ISI Mark?

The ISI Mark is a certification mark issued by BIS that confirms that a product conforms to a specific Indian Standard. Introduced in 1955, it is the oldest quality certification mark in India. The ISI mark is mandatory for certain products such as electrical appliances, food items, cement, and oil pressure stoves.

The presence of the ISI mark on a product signifies that the manufacturer has followed the guidelines and testing parameters outlined by BIS. It assures consumers that the product is safe to use and meets predefined quality benchmarks. For oil pressure stoves, the ISI mark is a must-have for sale in the Indian market.

IS 1342 – Indian Standard for Oil Pressure Stoves

The Indian Standard IS 1342 lays down the specifications for oil pressure stoves, which are primarily used for domestic and commercial cooking purposes. The standard provides comprehensive guidelines for material selection, design parameters, performance criteria, and safety requirements.

As per IS 1342, these stoves should operate within a pressure range of 100 kN/m² to 200 kN/m² (equivalent to 1 kgf/cm² to 2 kgf/cm²). The standard emphasizes the durability of materials used, efficient combustion, safety mechanisms, and ease of operation.

Additionally, IS 1342 mandates several tests to assess the stove's thermal efficiency, emissions control, and structural integrity. By meeting these requirements, manufacturers can ensure that their stoves are both safe and efficient for long-term usage.

IS 10109 – Certification for Oil-Pressure Stoves with Offset Burners

In addition to IS 1342, oil-pressure stoves with offset burners are also covered under Indian Standard IS 10109. These stoves have been included under the mandatory ISI certification scheme, meaning they cannot be imported, exported, or sold in India without an ISI mark.

This move by BIS strengthens consumer safety and product reliability. Manufacturers dealing with oil-pressure stoves having offset burners must ensure compliance with IS 10109 in addition to IS 1342, as applicable.

Mandatory Certification and Legal Compliance

BIS certification for oil pressure stoves is compulsory under the Product Certification Scheme (ISI Mark Scheme) - Scheme 1, Schedule 2 of the BIS Conformity Assessment Regulations. As per the applicable Quality Control Order, all oil pressure stoves meant for domestic or commercial use must carry the ISI mark.

Without this certification, manufacturers are prohibited from producing, distributing, or selling these stoves in the Indian market. Non-compliance can result in penalties under the BIS Act, including cancellation of licenses and legal action.

Benefits of BIS Certification for Oil Pressure Stoves for Manufacturers and Consumers

BIS certification offers numerous benefits for both manufacturers and consumers. For manufacturers, it enhances credibility and assures compliance with Indian laws and safety norms. The ISI mark makes their products more trustworthy and helps them compete confidently in the market.

From a consumer’s point of view, BIS-certified oil pressure stoves guarantee safety, performance, and quality. It ensures that the stove will function reliably without compromising user safety. Moreover, consumers tend to prefer ISI-marked products, which boosts the brand image of certified manufacturers.

Key benefits include:

• Legal eligibility to manufacture and sell oil pressure stoves in India.

• Increased consumer trust and product acceptance.

• Assurance of quality, safety, and performance.

• Compliance with government regulations and avoidance of penalties.

Scope of IS 1342

The scope of IS 1342 includes oil pressure stoves used for both domestic and commercial applications. The standard applies specifically to stoves using pressurized kerosene oil. These stoves are designed to function within a pressure range of 100 to 200 kN/m², ensuring safe combustion and operational efficiency.

The standard is applicable to single-burner, multi-burner, and offset-burner models, provided they meet all testing requirements. It includes provisions for material selection, burner performance, emission levels, thermal efficiency, and user safety features.

Timeline for BIS Certification

The estimated timeline to obtain BIS certification for oil pressure stoves depends on whether the manufacturer is based in India or abroad.

• Indian Manufacturers: Approximately 60 days, subject to proper documentation and timely inspection.

• Foreign Manufacturers: Approximately 180 days, including the time required for sample testing, customs clearance, and BIS office processing.

Timely application and proper documentation can significantly reduce delays in the certification process.

Documents Required for BIS ISI Certification for Oil Pressure Stoves

To apply for BIS ISI certification, the following documents must be submitted:

1. Test Reports: Laboratory reports as per IS 1342 from a BIS-recognized testing facility.

2. Factory Registration Documents: Proof of ownership, manufacturing license, and location of the production unit.

3. Production Process Flowchart: Detailed process description from raw material to finished product.

4. In-House Testing Facilities: Information on available lab equipment, test procedures, and quality assurance systems.

5. Authorized Signatory Documents: ID proofs, signatures, and authorization letter from the company’s director or proprietor.

These documents ensure transparency and verify the manufacturer’s capability to maintain consistent quality.

BIS Certification Process for Oil Pressure Stoves

The BIS ISI certification process involves the following stages:

1. Product Code Selection

Identify the applicable Indian Standard (IS 1342 or IS 10109) and corresponding product code from the BIS catalog.

2. Application Submission

Fill out the BIS online application form with accurate details and upload all supporting documents. Pay the prescribed application fee.

3. Factory Inspection

BIS appoints an auditor to inspect the manufacturing facility. The auditor checks production processes, quality control systems, and testing infrastructure.

4. Sample Testing

Sealed samples are collected during the inspection and sent to BIS-approved laboratories for testing. The product must pass all required parameters such as efficiency, durability, emissions, and safety.

5. Grant of License

Once the sample passes all tests and the inspection report is satisfactory, BIS issues the ISI license to the manufacturer. The manufacturer can now use the ISI mark on their certified product.

Types of Certification Processes

There are two different certification procedures based on the applicant's preparedness and product readiness:

Normal Procedure

• Manufacturers must prepare in-house test setups and documentation beforehand.

• BIS conducts factory inspection, followed by testing of collected product samples.

• After satisfactory results, BIS grants the license within 60 to 65 days for Indian manufacturers.

Simplified Procedure

• In this faster method, manufacturers first submit a report of pre-tested product samples.

• After submitting the online application, BIS inspects the factory and confirms compliance.

• Certification is issued within 35 to 40 days, provided all standards are met.

The simplified procedure is more suitable for well-established manufacturers with ready infrastructure and pre-tested products.

Importance of Compliance

Compliance with IS 1342 is not just about following regulations—it ensures product safety, improves manufacturing discipline, and builds long-term consumer confidence. Selling uncertified oil pressure stoves in India is a punishable offense. BIS has the power to suspend or cancel certification in case of non-compliance under Regulation 11 of the BIS (Conformity Assessment) Regulations, 2018.

Conclusion

BIS certification for oil pressure stoves is a critical step toward ensuring the safety, efficiency, and quality of these essential appliances. By complying with IS 1342, manufacturers not only meet legal requirements but also assure consumers of a reliable cooking solution. Adopting the BIS ISI mark safeguards public health and contributes to a more structured and regulated marketplace.

If you want any help in obtaining BIS Certification, then you can connect with BIS Experts in the Compliance Calendar through mail info@ccoffice.in or Call/Whatsapp at +91 9988424211.

FAQs

Q1. Is BIS certification mandatory for manufacturing oil pressure stoves in India?

Ans. Yes, BIS certification is mandatory for manufacturing, selling, or importing oil pressure stoves in India. These stoves must comply with the Indian Standard IS 1342 and carry the ISI Mark under the Product Certification Scheme of BIS. Non-compliance can lead to penalties, including cancellation of license and legal action by the Bureau of Indian Standards.

Q2. What is the applicable Indian Standard for oil pressure stoves?

Ans. The applicable standard is IS 1342, which outlines the specifications, testing methods, and safety requirements for oil pressure stoves using pressurized kerosene oil. For stoves with offset burners, IS 10109 is also applicable. These standards ensure performance, safety, durability, and user-friendliness of the stoves.

Q3. Who can apply for BIS certification for oil pressure stoves?

Ans. Only the manufacturer of the oil pressure stove can apply for BIS certification. Traders, importers, or distributors are not eligible. The manufacturer must have a functioning production unit and in-house testing facilities or access to BIS-recognized labs to demonstrate product conformity.

Q4. How long does it take to obtain BIS ISI certification for oil pressure stoves?

Ans. The timeline depends on whether the applicant is a domestic or foreign manufacturer:

• For Indian manufacturers, the average timeline is 30 to 65 days, depending on the procedure followed.

• For foreign manufacturers, the certification process may take around 180 days, considering additional steps like product testing and customs clearance.

Q5. What is the cost of obtaining BIS certification for oil pressure stoves?

Ans. The approximate cost for obtaining BIS ISI certification for oil pressure stoves is around ?60,000, which may vary based on product type, number of manufacturing locations, and additional compliances. The cost includes application fees, testing charges, inspection fees, and other processing expenses.

Q6. What documents are required for BIS certification of oil pressure stoves?

Ans. To apply for BIS certification, the following documents are required:

• Product test reports from BIS-approved laboratories

• Factory registration documents

• Manufacturing process flow chart

• Details of in-house testing facilities

• Information on authorized signatory and compliance officers Accurate documentation is crucial for avoiding delays during inspection and certification.

Q7. Can uncertified oil pressure stoves be sold in the Indian market?

Ans. No, selling oil pressure stoves without a valid ISI mark and BIS certification is prohibited in India. Such products are considered non-compliant and may be seized or penalized under the BIS (Conformity Assessment) Regulations, 2018. Only certified products can be legally manufactured, imported, and sold in the country.

You may also like